Quality Water Treatment Solutions
At Advanced Water Systems, LLC., we provide industry-leading solutions for your water treatment needs. Our range of services and products includes highly efficient commercial water filtration and water softeners/conditioners.
FEED WATER PARAMETERS:
Temp. 85 F maximum / Pressure 40-80 psi maximum / TDS 2000 ppm maximum. If higher consult factory / Iron tolerance 0.5 ppm maximum / Hydrogen sulfide must be removed / Silica tolerance can not be higher than 125 ppm in the concentrate stream. Antiscalant should be considered for any levels over 75 ppm. / Turbidity should be removed / Hardness over 10gpg should be softened.
OPERATING PARAMETERS:
Operating pressure 200 psi maximum / Water recovery is factory set at 33-35% / pH range 3 11/ Flow Rates are determined by the membrane mfgr’s. testing criteria of 1500 ppm Nacl solution, 77 F water temperature, 225 psi at 10-15% recovery. Actual flow rates may vary depending on the pre-treatment used, water conditions, system size, membrane array and applied pressure.
POWER REQUIREMENTS: 120V 50/60 Hz
OPTIONS:
The pre-filtration on the COMPACT is sufficient for the 150 an 250 gpd models. It is advisable that additional pre-treatment be installed in front of the COMPACT for the 450 and 800 gpd models. Higher volumes of water passing through the COMPACT can shorten filter life
| Model | GPD (minimum) | Membrane | Piping | Dimensions | ||
|---|---|---|---|---|---|---|
| Inlet | waste | prod | ||||
| COM-III 250 | 300-400 | 2.5” X 21” 1 ea. | 1/2” | 3/8” | 3/8” | 20” W X 22 D” X 36”H 88lbs |
| COM-III 450 | 500-600 | 2.5” x 21”” 2 ea. | 1/2” | 3/8” | 3/8” | 20” W X 22 D” X 36”H 92lbs |
| COM-III 800 | 800-900 | 4” X 21” 1 ea. | 1/2” | 3/8” | 3/8” | 20” W X 22 D” X 36”H 95lbs |
| COM-III 2000 | 1800-2000 | 4” x 40” 1 ea. | 1/2” | 1/2” | 1/2” | 20” W x 22” D x 50”H 105lbs |
Commercial Reverse Osmosis Equipment Compact Series III
Output Production: 150 gpd up to 800 gpd
Operating Parameters of Reverse Osmosis Compact Series III
Maximum operating pressure is 200 psi, with factory-set water recovery at 33-35% and a pH range of 3-11. Flow rates are determined by the membrane manufacturer's testing criteria, which involve a 1500 ppm NaCl solution, 77 °F water temperature, and 225 psi at 10-15% recovery. Actual flow rates may vary based on pre-treatment, water conditions, system size, membrane array, and applied pressure.
Options for Reverse Osmosis Compact Series III
Commercial Reverse Osmosis Equipment Model: Frame Mount Vertical
Output Production: 800 gpm to 25,200
FRAME MOUNT VERTICAL
GPD: 2,800 - 25,200
Standard Features:
Options:
Standard Electrical controls:
FEED WATER PARAMETERS:
*Temperature 85 F maximum * Pressure 40 - 80 psi maximum * TDS 2000ppm maximum. If higher, consult factory * Iron tolerance 0.5 ppm maximum * Hydrogen sulfide must be removed * Silica tolerance can not be higher than 125 ppm in the concentrate stream. Antiscalant should be considered for any levels over 75 ppm * Turbidity should be removed * Hardness must be removed.
OPERATING PARAMETERS:
*Operating pressure 200 psi max * Water recovery up to 60% and is field adjusted by customer. It is not recommended that the recovery be set higher than 50%. Only under certain conditions can the recovery be set higher. *pH range 3 - 11 * Flow rates are determined by the membrane Mfrgr's. testing criteria of 1500 ppm Nacl solution, 77F water temperature, 225 psi at 10 - 15% recovery. Actual flow rates may vary depending on the pretreatment used, water conditions, system size, membrane array and applied pressure.
Suitability of Reverse Osmosis Compact Series III
The pre-filtration on the COMPACT is sufficient for the 150 and 250 GPD models. It is advisable that additional pre-treatment be installed in front of the COMPACT for the 450 and 800 GPD models. Higher volumes of water passing through the COMPACT can shorten the filter life.
Details of Reverse Osmosis Compact Series III
Our Water Softeners / Conditioners
Our water softeners, such as the LC-200 Light Commercial Single Tank Softener and 95 MT-150 Light Commercial Twin Alternating Series, are designed for high-flow rates and are built with top-quality components. They are user-friendly and offer high capacities, making them ideal for a wide range of commercial applications. These systems use an ion exchange process to remove dissolved minerals from your water, ensuring it is soft and safe for use.
LC-200 Light Commercial Single Tank Softeners (2")
95 MT-150 Light Commercial Twin Alternating Series (1 1/2")
The Advanced Water Systems 95 MT-150 Twin Series water softeners, available in 8 models, cater to commercial applications with a hardness removal capacity ranging from 60,000 to 300,000 grains. Ideal for establishments like restaurants, car washes, laundromats, and small boilers, these softeners ensure a continuous supply of soft water. The LCTA 150 operates as a twin-unit alternating system, guaranteeing uninterrupted service. Here are some features of these water softeners.
Let’s Connect
All our systems come with a limited warranty, offering you peace of mind in your investment. Trust Advanced Water Systems, LLC, for all your water treatment needs.